1998/2002 Fadal VMC 15XT
Certified Used
Machine Specifications:
| Table Size | 38″ x 16″ |
| T-Slots | 3 x .562″ x 4.33″ |
| Cutting Feed Rate | .01-250 IPM |
| Rapid Feed Rate (XYZ) | 400 IPM |
| Max. Weight on Table | 1,500 lbs |
| Axis Drive Motor (XYZ) | DC |
| X Axis Travel | 30″ |
| Y Axis Travel | 16″ |
| Z Axis Travel | 20″ |
| Spindle Drive Motor HP | 15 HP |
| Torque | 75 ft-lbs |
| Spindle Speed | 10-7500 RPM |
| Spindle Taper | CAT 40 |
| ATC, Number of tools | 21 |
| Machine Width and Depth | 75″ W x 77″ D |
| Machine Maximum Height | 101″ |
| Machine Weight | 5,800 Lbs |
| Air Pressure Requirements | 120 PSI |
| Power Requirements | 190-260 VAC 3 Phase |
Included options: Rigid Tapping
This machine has been 100% inspected, cleaned and certified by our Service Technicians.
The paint on this machine is pristine, the machine previously came out of a shop that only cut light material, so the paint is still like it was the year it was manufactured. This is a very nice addition to someone’s shop that has a need for a small footprint machine that still has all the capabilities of a Larger machine.
Any questions on the machine and/or pricing, please contact us.